Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations SkipVought on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Data transmit through dial up
- Thread starter malk
- Start date
Hi
Consider doing the following:
1 - Create a dial-up networking connection to do the dial-up and log-in
2 - Set your dial up connection to time out after a period of inactivity (say 2 minutes)
3 - Have your VB program call a shell command to activate the dial-up networking connection
4 - Have your program wait for a period (say 1 minutes, depends how good the phones are)
5 - Transfer the files programatically
6 - That's it. The timeout will close the connection
Regards
Sadcow
Consider doing the following:
1 - Create a dial-up networking connection to do the dial-up and log-in
2 - Set your dial up connection to time out after a period of inactivity (say 2 minutes)
3 - Have your VB program call a shell command to activate the dial-up networking connection
4 - Have your program wait for a period (say 1 minutes, depends how good the phones are)
5 - Transfer the files programatically
6 - That's it. The timeout will close the connection
Regards
Sadcow
- Status
