PhoneK
Programmer
- Aug 18, 2006
- 147
Does anyone have a similar set up or know what the configs need to be for a 7400a data module to a Call Accounting server that settings are:
Baud - 1200
Parity - even
Data bits - 8
Stop bits - 1
We had this connection working in another location. The only change was going from a fiber T1 to a copper T1 (same provider) and a different 8-port digital circuit pack. The remote cdr does dial the data module extension but the data module appears to reject it and drops the call. Everything else on this connection has been checked out. Data Module show in service/idle. I am thinking it might have lost it's config when we moved it.
Any help would be appreciated.
Baud - 1200
Parity - even
Data bits - 8
Stop bits - 1
We had this connection working in another location. The only change was going from a fiber T1 to a copper T1 (same provider) and a different 8-port digital circuit pack. The remote cdr does dial the data module extension but the data module appears to reject it and drops the call. Everything else on this connection has been checked out. Data Module show in service/idle. I am thinking it might have lost it's config when we moved it.
Any help would be appreciated.