I am using Retrospect 5.0 on Mac OS9 and am trying to back up several Windows clients. I have 3 computers using SCSI drives, and 1 using IDE. I've also tried two other SCSI-based computers and one other IDE-based computer. All computers are attached to the same switch across the network. The problem is that all instances seem to point to the fact that trying to back up over the network from a SCSI device is painfully slow (about 25-40MB/min) while backing up from an IDE device is rather zippy (about 550-600MB/min). Has anyone run into this before, and/or have any suggestions as to how to remedy it?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations SkipVought on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Dantz Retrospect, SCSI drive backups very slow
- Thread starter queuebert
- Start date
Similar threads
- Locked
- Question
- Locked
- Question
- Locked
- Question