Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Daily Routine Check
- Thread starter glmyers
- Start date
- Thread starter
- #2
dialtonebone
Technical User
Just the CM?
"display alarms" and if you want to get granular, "display errors" and "display events". Alarms is a good daily check though.
Typically all the red flags from other status and display commands should generate an alarm.
There are more things you could check depending how in depth you want to get and the size of the system.
"display alarms" and if you want to get granular, "display errors" and "display events". Alarms is a good daily check though.
Typically all the red flags from other status and display commands should generate an alarm.
There are more things you could check depending how in depth you want to get and the size of the system.
- Thread starter
- #4
Thanks for your reply
Yes the CM
REPORT PERIOD
Interval : a(ll) From ?/?/ _:_ To: ?/?/_:_ is this time or date
EQUIPMENT TYPE (Choose only one, if any, of the following
Media Gateway
Cabinet
Port Network
Category
Extension
Trunk (group/member)
Assistance Please
Yes the CM
REPORT PERIOD
Interval : a(ll) From ?/?/ _:_ To: ?/?/_:_ is this time or date
EQUIPMENT TYPE (Choose only one, if any, of the following
Media Gateway
Cabinet
Port Network
Category
Extension
Trunk (group/member)
Assistance Please
dialtonebone
Technical User
F5 for help, F3 to submit/execute.
- Status
Similar threads
- Locked
- Question