Daddy pls help me! (How to Send exact number)

[Babaked80]

Hi every one

I have mx one classic with 1 lim
All 8 pri link are on mgu
I set a route for pri 1 in telephoney system
And i use mx one 5.
When i call out to another pbx which is panasonic, i cant send my 4 digit number.

Routr access code is 9
And my directory numbers are 6000- 7000.
Asume that i dont have any extra config on numbering.just want to send my exact number to another pbx.
Pls help me step by step.
I am not very familiar with MML commands.

And i now i have Clip licences.
So what is the solution for me.

Thanks guys

 

[whosrdaddy]

Hi Babaked80,

we need some additional info here.

please share the feedback of these commands:

RODAP:ROU=X; // where X is the route to the Panasonic system
RODDPEST=9; // so you are dialing 96xxx to reach Panasonic, correct?
extension -p -d Y // where Y is the extension that calls the Panasonic system
extension_profile -p --csp Z // profile of extension Y

/Daddy



-----------------------------------------------------
Helping people is my job...

 

[Babaked80]

Hi
X=1
Yes dest=9
Which is my route access code
And i want all of my number (6000-7000) can call outside

And for the profile of my extention
I cant access to systim untill tomorow
So if its neccesary i will post it tomoroe
On wednsday.

Thanks daddy

 

[Babaked80]

eri_sn_admin@SP19-TELCO-PABX-01:~> extension_profile -p --csp 0

Common Service Profile
CSP Cust Traf Serv Cdiv Roc Npres Offered Forced CSP Name
Time DisconnectTime
0 0 1103151515 2000001100000000000000000002 11111100011100 000001 0001000 0 0 CSP0