D-LINK DI-804v and VPN

[tsltsl]

Hi,
has anyone experience in setting up 2 DI-804v with VPN on 2 different locations with ADSL connections?

I'm planing on connecting one in an office with ADSL connection with statip IP and the other in a home with ADSL connection with static IP.

Further I plan to create a VPN tunnel between these IP addresses.
Would this be transparent to the users?
I guess they would not need any VPN client software for this, right?

Thanks // tsl

 

[Eyas]

Hi

I tried it and it worked like a charm, as long as ju set up the tunnel between the two 804s. Check out this link to get your settings.

http://support.dlink.com/faq/view.asp?prod_id=1034&question=804v

/Eyas

 

[tsltsl]

Thanks Eyas,
this was great information. The link describes it all and I can go ahead an purchase the 804s.
It looks like a sweet solution.

rgds // tsl

 

[tsltsl]

Eyas,
I saw that you earlier posted a question about connecting to a VPN:ed 804v via the WinXp built in VPN client.
Did you have any luck in that department or did you go with 2 804v's?
Question for asking is that I have one 804v and one 804.
Behind the 804 there's a WinXP Pro client that should connect to the network behind the 804v. If this can be achieved without purchasing another 804v to replace the 804 I could save som bucks =)

Thanks