Customer Logo's

[Atkins80]

Hi All

Im new to the Mitel systems and have seen that other dealers have been able to display a customer logo on the handsets up in the top section of the handset screen (53XX models) does any body have clear instructions on how to do this and is it a simple process??? any info would be good

thanks

 

[Billz66]

its software dependant

What mitel system are you referring to
What you are talking about is called software branding and you can use the HTML toolkit to generate an image , upload it to the pabx and then apply it to the device

The image for Monochrome( 5320,5330,5340 ) is a smaller size one than for 5360

If I never did anything I'd never done before , I'd never do anything.....

and due to an endless stream of MiCollab , MiCC issues
Life would be simpler If only they tested products properly before releasing them .....

 

[Atkins80]

Usually on the 3300 CXII controller with 5320e and 5330e handsets, I'll do some extra research and have a play around

cheers

 

[Billz66]

there was an older version ( mcd 4 i think) where you needed html app licenses . on the later versions its not required and you can create screensaver and branding information woithut them

If I never did anything I'd never done before , I'd never do anything.....

and due to an endless stream of MiCollab , MiCC issues
Life would be simpler If only they tested products properly before releasing them .....

 

[LoopyLou]

Not still need the HTML tool kit?

You can't duct tape stupid.

 

[Billz66]

yes you still need the toolkit to make them but no longer need a html app license to use them

If I never did anything I'd never done before , I'd never do anything.....

and due to an endless stream of MiCollab , MiCC issues
Life would be simpler If only they tested products properly before releasing them .....

 

[RAMitel]

These websites maybe of interest.

http://mitelappbuilder.com/ScreenSavers.htm

http://appbuilder.ingeniussoftware.com/