Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

custom VPN Tunnel not appearing when trying to add route

Status
Not open for further replies.

Russtoleum

IS-IT--Management
Sep 17, 2009
6
US
Ok so, I just purchased a TZ SOHO for my company and I am trying to get it connected to my AWS VPC. I have the tunnel up with a green light and all seems well. Problem is, when i go to add a route when it comes to the Interface option my tunnel isn't in there, the following are my options:

--Select an Interface--
Create VPN Tunnel interface...
X0
X1
W0
====VPN Tunnel Interface====
Drop_TunnelIf

And that's it. I have talked to AWS support and they say when they usually see this it's because the vpn is a site to site and not a tunnel but he confirmed something seems off. I don't have a support contract with sonicwall so i can't call them and before i drop the money on a contract i thought i would ask around.

Any help is appreciated.
 
Have you taken a look at the sonicwall technote for setting up aws vpc? Here is the guide.


Are you trying to do setup a dynamic route based or a static policy based vpn? It sounds like you have it configred as a static policy vpn but your trying to do a dynamic route based vpn.

I wish I could be of more help however I only have experience setting up a vpn to Azure.

Regardless goodluck!
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top