CUCM SNMP Set Command

[dogg1]

Hi All,

I'm trying to test an snmp alarms on our new CUCM Cluster. I have everything setup correctly in CUCM and I try to use the snmp set command in CLI. It is complaining about the dash in snmpset -c <community string> -v2c. Any suggestions or idea why this is not working?


Thanks

Jeremy

 

[whykap]

Your format is probably wrong. Not sure why you're not setting that from the web admin pages but heres the CLI command book:

https://www.cisco.com/c/en/us/td/do...CA6B8B0D_00_cucm-cli-reference-guide-115.html

Hope this helps