Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations IamaSherpa on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

ct-adapter

Status
Not open for further replies.

MD6

Technical User
Apr 30, 2002
76
BR
Hi,

I Have configured ct-adapter for CSTA(MD110 BC9). I need information about RS232 Interface (baudRate, Word, Data Bits, Parity and Stop Bit).
tks

md6
 
The speed and format TAU-D is fixed at power-up as follows:

Data Speed: 9.600 kbit/s
Format: Asynchronous
Data bits: 8
Parity: None
Stop bits: 1


//Regards Soaplover
 
Hi,

thanks,

I like received messages CSTA in a hiperterminal or winfiol. The application Link is mandatory?
tks
md6
 
Al gives commands to the MD csta port for call handling .
And to start stop monitoring .
You can not have CSTA initiated as CSTA port in MD without AL .
You can instead install TAU-D on a DTS ,this way it becomes a third party tapi adaper .

//Regards Soaplover
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top