CS1k 7.5 forward issue

[blondboy71]

We had our CS1k upgraded from 5.0 to 7.5 within the last year. We have 4 BCM 450 systems with digital phones attached to the CS1K. When we were at 5.0, we were able to forward ip phones that were registered to the CS1k to a digital phone on one of the BCM systems. Since the upgrade we are not able to do this. The BCM phones can still forward to CS1k, but not reverse. Anybody got any idea's? Thanks!

 

[edkender]

Check to see if CFXA is in the profile of the set on the CS1K trying to forward to the BCM. Ran into to the same issue with trying to forward across my network after 7.5 upgrade with a few sets.

 

[blondboy71]

That worked. Thanks!

 

[edkender]

Yes this is very odd because I never needed this in a CDP scenario before. I looked at my net-data and that all looks fine. Not sure what the reasoning is when going to 7.5 with networked calls.