Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations dencom on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

CS1000E unable to boot to the install menu

Status
Not open for further replies.

tfp2006

Programmer
Apr 28, 2006
51
US
I am trying to install software on a new cppm card. I know the 5.5 software on the pcmcia card is good because I used it on the other core. Has anyone seen this?

Synchronizing with Firmbase...
General Software Firmbase[r] SMM Kernel 1.3.3 May 11 2005 00:13:58
Copyright (C) 2002-2005 General Software, Inc.

Firmbase initialized.









00000589K Low Memory Passed
01035136K Ext Memory Passed
Wait.....

PCI Device Table.
Bus Dev Func VendID DevID Class Irq
00 00 00 8086 3580 Host Bridge
00 00 01 8086 3584 System
00 00 03 8086 3585 System
00 1D 00 8086 24C2 Serial Bus 12
00 1D 01 8086 24C4 Serial Bus 11
00 1D 07 8086 24CD Serial Bus 10
00 1E 00 8086 244E PCI-to-PCI Bridge
00 1F 00 8086 24C0 ISA Bridge
00 1F 01 8086 24CB IDE Controller 9
00 1F 03 8086 24C3 Serial Bus 70 Revision 5.3
01 00 00 104C AC56 CardBus Bridge 12ights reserved.
01 01 00 8086 1209 Ethernet 11
01 02 00 8086 1209 Ethernet 9
01 03 00 8086 1078 Ethernet 7
Plug-n-Play v1.0A Copyright (C) 2005 General Software, Inc.

Polling Hard Drive and Compact Flash Locations

+------------------------------------------------------------------------------+
| System BIOS Configuration, (C) 2005 General Software, Inc. |
+---------------------------------------+--------------------------------------+
| System CPU : Pentium M | Low Memory : 632KB |
| Coprocessor : Enabled | Extended Memory : 1011MB |
| Ide 0 Type : 3 | Serial Ports 1-2 : 03F8 02F8 |
| Ide 1 Type : 3 | ROM Shadowing : Enabled |
| Ide 2 Type : 3 | BIOS Version : NTDU74AA 15 |
+---------------------------------------+--------------------------------------+

Press F to force board to boot from faceplate drive.
.......


CPU Frequency = 1400 MHz

Attempting to boot from faceplate drive.


Remove disks or other media.
Press any key to restart

Remove disks or other media.
Press any key to restart
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top