CS1000E rls 5 and BCM400 H.323 connectivity

[zardari42]

Hi, it is CS1000E rls 5.5 and BCM400 both have H.323 license. I successfully connected 02 BCM400 with H.323 and now i am trying to connect BCM400 and CS1000E using H.323. When i select all Codec at BCM and at CS1000E no call gets OK and i get fast busy tone, if i use G711 at CS1000E and all three codes at BCM i get only one way call from CS1000E to BCM. When i select G729 at CS1000E and track call at BCM it shows call is coming using FAX Codes inspite of G729. Does somebody knows what codes/settings should be use for BCM and CS1000E h323 connectivity?
Regards

 

[allenmac]

Check your payload settings in both the CS1000 and BCM, they must match for the speech path to establish correctly.

The BCM payload defaults to a different value than the CS1000 payload default.