cs1000e release 5.5 mgc

[khanadil]

when i configure the mgc parameter using em, and then reboot the mgc i get this error on mgc cli,

dsp db is present wrong or missing config,

basically the dsp db does not pick the ip assigned,


11/06/2009 03:54:32 LOG0003 VGW: VGW2119 VGW VoIP parameter configuration failur
e : Incorrect/Missing DSP DB configuration, Boot-up aborted for DSP DB: 2 (51)

-> 11/06/2009 04:05:01 LOG0004 tMgcVgwAppStartRetry: DSP DBs are present, waitin
g for mgcdb.xml from Primary Call Server
IKE: socket error.
: S_errno_EHOSTDOWN
regWithMainCabinet: RPC: Port mapper failure - RPC: Unable to send
11/06/2009 04:05:06 LOG0003 regRetry: Failed to Register with Primary Call Serve
r[10.50.50.1]

what colud be the problem,

other 3 mgc work perfect, no ip clash,

please help

 

[Reusser]

Try clearing MGC and starting over - also make sure daughter cards in correct location.

To Clear Media Gateway Controller Card

TelNet to TLAN IP address
LogIn admin1
password

CTRL LDB
user name (pdt2)
password (pdt2 password)


Type (case sensetive) mgcIPClear when done you should get oxo



Change lan config under media gateway


To enter set up

cntrl oam
username= (pbx login)
password= (pbx pass)
type mgcsetup