CS1000E DSP ERR008

[9201]

Any one done upgrade to CS5.0 with CPPM and 128 DSP on the MGC and sometime call between cabinet only get 1 way talk path. Console terminal screen display err008.

ERR008 0 0 11 15 22 7 4 0 1 4


ERR008 0 0 12 17 22 7 4 0 1 15


ERR008 0 0 13 22 22 6 4 0 1 5


ERR008 0 0 12 23 22 7 4 0 1 6

 

[tnphoneman]

Had that with a bad DSP daughter board.

 

[9201]

Thanks for the reply, How do you know which one is bad? i have 3 cabinet, each cabinet have 128 DSP and callpilot is in the 3rd cabinet and T-1 all on the 1st cabinet.

 

[tnphoneman]

You have to make several test calls until you hit the ones giving the problem. My trouble was with the 32 port DSP so I would start there by disabling the 96 port board. They go through a round robbin type of sequence if you stat the card they are programmed on.

 

[vztech]

Trac the set to see what DSP it uses

It's only dialtone-VZ