CS1000 using SIP with AXIS A8004 Video Door Station

[SherWat]

Hello all. Trying to set up a video door station to connect to a CS1000 7.6 system. When someone presses the button on the video door station it should call an extension .

The called extension is an IP set

I have these licenses:

TRADITIONAL TELEPHONES 316 LEFT 299 USED 17
DECT USERS 0 LEFT 0 USED 0
IP USERS 335 LEFT 58 USED 277
BASIC IP USERS 0 LEFT 0 USED 0 OVERFLOW 2
TEMPORARY IP USERS 0 LEFT 0 USED 0
DECT VISITOR USER 0 LEFT 0 USED 0
ACD AGENTS 10 LEFT 10 USED 0
MOBILE EXTENSIONS 30 LEFT 22 USED 8
TELEPHONY SERVICES 0 LEFT 0 USED 0
CONVERGED MOBILE USERS 0 LEFT 0 USED 0
AVAYA SIP LINES 0 LEFT 0 USED 0
THIRD PARTY SIP LINES 20 LEFT 12 USED 8

PCA 20 LEFT 20 USED 0
ITG ISDN TRUNKS 0 LEFT 0 USED 0
H.323 ACCESS PORTS 0 LEFT 0 USED 0
AST 1 LEFT 1 USED 0
SIP CONVERGED DESKTOPS 0 LEFT 0 USED 0
SIP CTI TR87 0 LEFT 0 USED 0
SIP ACCESS PORTS 44 LEFT 32 USED 12
RAN CON 4 LEFT 4 USED 0
MUS CON 10 LEFT 10 USED 0 ACTIVE

Do I have the correct licenses to configure the door station as a SIP endpoint on the CS1000?

 

[biv343]

You have 12 third party SIP licenses left, and presumably you have SIP line gateway deployed since 8 SIP3 phones are built. You should be OK.

THIRD PARTY SIP LINES 20 LEFT 12 USED 8