Cs1000 to Hipath4k

[SLMY]

I have finally gotten the protocol changed on my CS 1000 to Siemens Highpath connection. We settled on NI2 protocol.

After reestablishing the connection, I cannot dial out two of my trunks, nor can I receive calls into the iPad from those two trunks.

The third trunk works just fine, and also my dialing from the Highpath two extensions on the CS 1000 are actually working.

Any idea where I should look first to bring the other two trunks up? Unfortunately they are the two most important ones.

 

[TIgerV]

We actually have the hipath to Avaya working, so it's opposite of what we had with the 4ESS protocol.

--TIger