Trying to connect a TDM CS1000 Rel7.5 to a hosted CUCM platform using a Cisco Router as a Voice Gateway. Do I need a cross over cable to connect the router to the PBX? When I connect now, I get a Release Wrong Mode error and the D-Channel will not establish
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
CS1000 to Cisco UCM via TDM Voice Gateway
- Thread starter Fast4Dr
- Start date
If there is no CSU between, you need a crossover. You have a loop back established right now. That is why you are seeing Wrong Mode. Or at least that is what you normally see when you have a loop back. Try a crossover, it's quick and easy to do.
John Anaya
Amdocs Inc.
ACSS/ACIS - CS1000 Rls 7.5/Call Pilot 5
ACSS/ACIS - SME - IP Office 8.0
APSS/APDS - Avaya UC Services
Public Profile
John Anaya
Amdocs Inc.
ACSS/ACIS - CS1000 Rls 7.5/Call Pilot 5
ACSS/ACIS - SME - IP Office 8.0
APSS/APDS - Avaya UC Services
Public Profile
- Status
Similar threads
- Locked
- Question
- Question