Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

CS1000 M39XX Firmware Questions

Status
Not open for further replies.

Crash4723

Vendor
Jul 27, 2011
50
US
Does anyone know what M39XX firmware comes standard on what system Rls? I have 4.5, 5.0, 5.5, 5.0, & 7.0, but I don't know what firmware comes standard for the M39XX phones. What I am trying to do is locate at least F/W 8.9 for the M3903, then put the system together and push the firmware down to a bunch of phones. I have an ancient 24.5 loaded at the moment, but the firmware on that system is ancient as well. If anyone can lend some advice I would greatly appreciate it.

 
I've found this old file below

The following versions of up-issued firmware for the M3900 series of digital phones are now Generally Available:
• M3903 v8.8
• M3904 v9.0
• M3905 v9.0
This new firmware is applicable to the following CS software releases:
• X21 CS 1000 Release 3.0
• X21 CS 1000 Release 4.0
• X21 CS 1000 Release 4.5
• X21 CS 1000 Release 5.0 (not GA at the time of this bulletin)

M3903 version 8.8
CR ID Number Description
Q00910549 SE07CH: M3903 Does Not Log Calls That Are Call Waited
Q00910654 SE07CH: M3903 Does Not Log Calls Correctly With Key Short Hunt (KSH) Option
Q00915010 Meridian1: SETS:DIALED NUMBER DISAPEARS ON M3903
Q00930190-01 3903 set locks up after CFWD information is displayed
Q00937053 M3903: Call to CWT key waiting more then 5 sec. is not logged
Q00937926 M3903: names of some languages are displayed incorrectly
Q00955392 M3903 : (hungarian) Extra characters on display for Callers information
Q00985804-01 M3903: with PVR pressed it is impossible to dial from Callers or Redial list
Q01007355 M3903: Audible click noise heard when user goes off-mute
Q01160910 On hook does not work on M3903 with CLS GRLA+HFA
Q01163169-01 Meridian1: SETS:TYPO IN JAPANESE IN 3903 at Jaccs

M3904 version 9.0
CR ID Number Description
Q00352113 Ceština spelling in Eastern Europe Language files
Q00719834-05 “Ring again is active” flashes on M3904/05 every 1 min 55 secs
Q00825263 Loud Humming on Full Duplex Handsfree Unit
Q00919486 SE07CH: M3904 Log All Calls option does not log second Call as of Call waiting
Q00919861 M3904/05: Problems with Personal Directory
Q00928126 M3904 8.8: Extra chars in call log with outgoing and incoming calls (autodisp)
Q00952756 SE07CS: M3904 logged the 1st incoming call Twice when interact with KSH
Q00971945 SE07CW: M3904 message display does not change after AAB deactivation.
Q00983686 M3904 Key Click option switch to OFF when CFW activated
Q00985804 M3904/05: with PVR pressed it is impossible to dial from Personal directory
Q01024652 M3904 Misdialing numbers
Q01071026 M3904 phonebook Hebrew entries are not sorted correctly
Q01075317 LOC info gets cut in display of M3904 Set while making a multiple redirected call
Q01078879 3904 set display will not update
Q01163169 Meridian1:SETS:TYPO IN JAPANESE IN 3904,3905 at Jaccs
Q01267422 The CTIA quits transmitting on the RS232 interface with the Plant Vesta and TAPI Service Provider Meridian 1 when the application sets idle.
Q01236511 NORT225324: Number not be stored correctly in the Redial List – last…

M3905 version 9.0
CR ID Number Description
Q00352113 Ceština spelling in Eastern Europe Language files
Q00719834-05 “Ring again is active” flashes on M3904/05 every 1 min 55 secs
Q00919486 SE07CH: M3904 Log All Calls option does not log second Call as of Call waiting
Q00919861 M3904/05: Problems with Personal Directory
Q00928126 M3904 8.8: Extra chars in call log with outgoing and incoming calls (autodisp)
Q00952756 SE07CS: M3904 logged the 1st incoming call Twice when interact with KSH
Q00971945 SE07CW: M3904 message display does not change after AAB deactivation.
Q00975570-01 M3905: Headset Insertion/Removal Not Detected Properly
Q00983686 M3904 Key Click option switch to OFF when CFW activated
Q00985804 M3904/05: with PVR pressed it is impossible to dial from Personal directory
Q01004822 M3905: DN of calling party remain on the display
Q01024652 M3904 Misdialing numbers
Q01078879 3904 set display will not update
Q01163169 Meridian1:SETS:TYPO IN JAPANESE IN 3904,3905 at Jaccs
Q01186949 Pacific Life/81C/CPP/3.0/ACD agents cannot login after INI
Q01267422 The CTIA quits transmitting on the RS232 interface with the Plant Vesta and TAPI Service Provider Meridian 1 when the application sets idle.
Q01236511 NORT225324: Number not be stored correctly in the Redial List – last…

###############################################################################################################

The following versions of up-issued firmware for the M3900 series of digital phones are now Generally Available:
• M3903 v8.8
• M3904 v9.0
• M3905 v9.0
This new firmware is applicable to the following CS software releases:
• X21 CS 1000 Release 3.0
• X21 CS 1000 Release 4.0
• X21 CS 1000 Release 4.5
• X21 CS 1000 Release 5.0 (not GA at the time of this bulletin)

M3903 version 8.8
CR ID Number Description
Q00910549 SE07CH: M3903 Does Not Log Calls That Are Call Waited
Q00910654 SE07CH: M3903 Does Not Log Calls Correctly With Key Short Hunt (KSH) Option
Q00915010 Meridian1: SETS:DIALED NUMBER DISAPEARS ON M3903
Q00930190-01 3903 set locks up after CFWD information is displayed
Q00937053 M3903: Call to CWT key waiting more then 5 sec. is not logged
Q00937926 M3903: names of some languages are displayed incorrectly
Q00955392 M3903 : (hungarian) Extra characters on display for Callers information
Q00985804-01 M3903: with PVR pressed it is impossible to dial from Callers or Redial list
Q01007355 M3903: Audible click noise heard when user goes off-mute
Q01160910 On hook does not work on M3903 with CLS GRLA+HFA
Q01163169-01 Meridian1: SETS:TYPO IN JAPANESE IN 3903 at Jaccs

M3904 version 9.0
CR ID Number Description
Q00352113 Ceština spelling in Eastern Europe Language files
Q00719834-05 “Ring again is active” flashes on M3904/05 every 1 min 55 secs
Q00825263 Loud Humming on Full Duplex Handsfree Unit
Q00919486 SE07CH: M3904 Log All Calls option does not log second Call as of Call waiting
Q00919861 M3904/05: Problems with Personal Directory
Q00928126 M3904 8.8: Extra chars in call log with outgoing and incoming calls (autodisp)
Q00952756 SE07CS: M3904 logged the 1st incoming call Twice when interact with KSH
Q00971945 SE07CW: M3904 message display does not change after AAB deactivation.
Q00983686 M3904 Key Click option switch to OFF when CFW activated
Q00985804 M3904/05: with PVR pressed it is impossible to dial from Personal directory
Q01024652 M3904 Misdialing numbers
Q01071026 M3904 phonebook Hebrew entries are not sorted correctly
Q01075317 LOC info gets cut in display of M3904 Set while making a multiple redirected call
Q01078879 3904 set display will not update
Q01163169 Meridian1:SETS:TYPO IN JAPANESE IN 3904,3905 at Jaccs
Q01267422 The CTIA quits transmitting on the RS232 interface with the Plant Vesta and TAPI Service Provider Meridian 1 when the application sets idle.
Q01236511 NORT225324: Number not be stored correctly in the Redial List – last…

M3905 version 9.0
CR ID Number Description
Q00352113 Ceština spelling in Eastern Europe Language files
Q00719834-05 “Ring again is active” flashes on M3904/05 every 1 min 55 secs
Q00919486 SE07CH: M3904 Log All Calls option does not log second Call as of Call waiting
Q00919861 M3904/05: Problems with Personal Directory
Q00928126 M3904 8.8: Extra chars in call log with outgoing and incoming calls (autodisp)
Q00952756 SE07CS: M3904 logged the 1st incoming call Twice when interact with KSH
Q00971945 SE07CW: M3904 message display does not change after AAB deactivation.
Q00975570-01 M3905: Headset Insertion/Removal Not Detected Properly
Q00983686 M3904 Key Click option switch to OFF when CFW activated
Q00985804 M3904/05: with PVR pressed it is impossible to dial from Personal directory
Q01004822 M3905: DN of calling party remain on the display
Q01024652 M3904 Misdialing numbers
Q01078879 3904 set display will not update
Q01163169 Meridian1:SETS:TYPO IN JAPANESE IN 3904,3905 at Jaccs
Q01186949 Pacific Life/81C/CPP/3.0/ACD agents cannot login after INI
Q01267422 The CTIA quits transmitting on the RS232 interface with the Plant Vesta and TAPI Service Provider Meridian 1 when the application sets idle.
Q01236511 NORT225324: Number not be stored correctly in the Redial List – last…



All the best

Firebird Scrambler
Meridian 1 / Succession and BCM / Norstar Programmer in the UK

If it's working, then leave it alone!.
 
Do you have access to the ESPL, Pep Library. I just looked and the 8.9 is still out there.
 
I'm running rls 5.5 and the firware is 89 for the 3904.
 
Thanks KCFLHRC, got it!

I will work with my onsite tech here in the warehouse this afternoon to download this to the system and then push out to the phone. Having not done this particular procedure before, it should be pretty straight forward right?
 
You need to go into PDT to update the firmware on the Call Server then push it out to the sets. I believe you can also do it in Element Manager.
 
Is there a specific LD that we need to be in to do it from the PDT?
 
If your not familiar with PDT then you really should not be in there. PDT is basically the root of the operating system, one missed keystroke can be disastrous.
 
KCFLHRC

Perfect. I was able to successfully load the 8.9 for the M3903's. Thanks! Would you happen to have 8.9 for the M3904, and 8.4 for the M3902?
 
Cool. Thanks for the 8.4 for the M3902's.. Would you happen to have the 9.0 for the M3904's?
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top