Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
CS1000 line cards 1
- Thread starter Rickg47
- Start date
-
1
- #3
Firebird Scrambler
Systems Engineer
You can remove all the analogue TN's to free up a card slot. You might also have to use a command such as..
When all the programming is removed from a card slot the slot is still flagged as being that card type and will show against 'LUU'
To remove the card type flag and stop the ports from showing against 'LUU' the card has to be removed from the system
REQ OUT
TYPE CARDSLT
TN XX YY ZZ
or
REQ OUT
TYPE CARDMLT
TN XX YY ZZ
Also check in LD 22 against ISM that you have enough spare digital ports.
Firebird Scrambler
Nortel Meridian 1 / Succession and BCM / Norstar Programmer in the UK
Advance knowledge on BCM support
When all the programming is removed from a card slot the slot is still flagged as being that card type and will show against 'LUU'
To remove the card type flag and stop the ports from showing against 'LUU' the card has to be removed from the system
REQ OUT
TYPE CARDSLT
TN XX YY ZZ
or
REQ OUT
TYPE CARDMLT
TN XX YY ZZ
Also check in LD 22 against ISM that you have enough spare digital ports.
Firebird Scrambler
Nortel Meridian 1 / Succession and BCM / Norstar Programmer in the UK
Advance knowledge on BCM support
- Status
Similar threads
