cs1000 down, replace processor? if yes, what's compatible?

[Vurk4]

I have a CS1000 that went down, tried reseating everything, even tried with the processor hot... It just repeats the boot/copyright info over and over.

I did scroll back the terminal and was able to pull the following:
(1/3/13 8:57:58.165) SRPT730 OS 0: Cold Start
Release: x112216
Created: Fri Jan 31 14:04:49 PST 1997
(1/3/13 8:58:34.725) BUG6341 ssDrv: Resource aquisition error. pDrv = 0x2008525
c, task = tC3T23, tid = 0x20308130
resource = mutex, ID = 0x2006d5a0, errno = S_semLib_INVALID_OPERATION



(1/3/13 9:00:47.181) SRPT730 OS 0: Cold Start
Release: x112216
Created: Fri Jan 31 14:04:49 PST 1997

IOD071 - ERROR READING DIRECTORY 100001 100001

SYS000 000808 000000 000000 000000 CPU 0
SYSDB RLS/ISS: 2216 LOADED FROM C: DATE/TIME: 31/1/2013 01:02:50 RECS: 86 SEQNO:
5207
SYSLOAD RELEASE 22.16

logo

(1/3/13 9:06:16.213) SRPT730 OS 0: Cold Start
Release: x112216
Created: Fri Jan 31 14:04:49 PST 1997

IOD071 - ERROR READING DIRECTORY 100001 100001


Meridian 1 X11 System Software
Release : x112216
Created : Fri Jan 31 14:04:49 PST 1997
Loaded : 1/3/13 9:02:18

Copyright(C) 1972-1994 Northern Telecom, Inc. All Rights Reserved.
VxWorks 5.1.1
Copyright(C) 1984-1994 Wind River Systems, Inc. All Rights Reserved.
Use of the above software subject to terms of a license agreement.
U.S. Government users subject to "Restricted Rights" under FAR & DFAR.


SYS000 000808 000000 000000 000000 CPU 0
SYSDB RLS/ISS: 2216 LOADED FROM C: DATE/TIME: 31/1/2013 01:02:50 RECS: 86 SEQNO:
5207
SYSLOAD RELEASE 22.16
SYS0072
SYS3011 8 0 1
SYS3011 8 0 4
SYS3011 8 0 3
SYS3011 8 0 2
SYS0232 KEY# 0 0 7100 TN 10 0 0 0
SYS0232 KEY# 0 0 7100 TN 10 0 0 8
SYS0232 KEY# 0 0 7100 TN 10 0 0 9
SYS0310 KEY# 0 0 33 TN 10 0 0 10
SYS0310 KEY# 1 0 33 TN 10 0 0 10
SYS0310 KEY# 2 0 33 TN 10 0 0 10
SYS0310 KEY# 3 0 33 TN 10 0 0 10
SYS0310 KEY# 4 0 33 TN 10 0 0 10
SYS0310 KEY# 5 0 33 TN 10 0 0 10
SYS0310 KEY# 6 0 33 TN 10 0 0 10
SYS0310 KEY# 7 0 33 TN 10 0 0 10
SYS4423 CUST 0 DN 7052 TN 4 0 0 12

SYS4423 CUST 0 DN 3235 TN 5 0 0 3

SYS4423 CUST 0 DN 7065 TN 6 0 0 4

SYS4423 CUST 0 DN 7149 TN 6 0 0 6

SYS4423 CUST


(1/3/13 9:00:47.181) SRPT730 OS 0: Cold Start
Release: x112216
Created: Fri Jan 31 14:04:49 PST 1997

IOD071 - ERROR READING DIRECTORY 100001 100001


(1/3/13 8:57:58.165) SRPT730 OS 0: Cold Start
Release: x112216
Created: Fri Jan 31 14:04:49 PST 1997
(1/3/13 8:58:34.725) BUG6341 ssDrv: Resource aquisition error. pDrv = 0x2008525
c, task = tC3T23, tid = 0x20308130
resource = mutex, ID = 0x2006d5a0, errno = S_semLib_INVALID_OPERATION

SYS000 000400 000000 000000 000000 CPU 0
SYSDB RLS/ISS: 2216 LOADED FROM C: DATE/TIME: 31/1/2013 01:02:50 RECS: 86 SEQNO:
5207
SYSLOAD RELEASE 22.16
SYS0072
SYS0072
SYS3011 16 0 4
SYS3011 16 0 3
SYS3011 16 0 2
SYS3011 16 0 1
SYS0232 KEY# 0 0 7100 TN 10 0 0 0
SYS0232 KEY# 0 0 7100 TN 10 0 0 8
SYS0232 KEY# 0 0 7100 TN 10 0 0 9
SYS0232 KEY# 0 0 7701 TN 14 0 0 3
SYS0232 KEY# 0 0 7701 TN 13 0 0 5
SYS0232 KEY# 0 0 7701 TN 15 0 0 7
SYS0232 KEY# 0 0 7701 TN 13 0 0 13
SYS0232 KEY# 0 0 7701 TN 16 0 0 12
SYS0232 KEY# 0 0 7701 TN 17 0 0 3
SYS0232 KEY# 0 0 7701 TN 17 0 0 4
SYS0232 KEY# 0 0 7701 TN 18 0 0 11
SYS0310 KEY# 0 0 >3 TN 20 0 0 8
SYS0310 KEY# 1 0 >3 TN 20 0 0 8
SYS0310 KEY# 2 0 >3 TN 20 0 0 8
SYS0310 KEY# 3 0 >3 TN 20 0 0 8
SYS0310 KEY# 4 0 >3 TN 20 0 0 8
SYS0310 KEY# 5 0 >3 TN 20 0 0 8
SYS0310 KEY# 6 0 >3 TN 20 0 0 8
SYS0310 KEY# 7 0 >3 TN 20 0 0 8
SYS4423 CUST 0 DN 7111 TN 15 0 0 4

SYS4423 CUST 0 DN 7030 TN 18 0 0 1

SYS4423 CUST 0 DN 7001 TN 18 0 0 1

DONE

IOD071 - ERROR READING DIRECTORY 100001 97380



IOD071 - ERROR READING DIRECTORY 100001 100001

 

[Vurk4]

Those were the only thing I could find other than the repeated initial boot and self test that kept repeating.

If we need to replace the processor, what all are compatible?

Current: ntdk20ab rel. 7

 

[vnetmanager]

It looks like you just lost the software, not the entire card - IOD071 - ERROR READING DIRECTORY 100001 100001 - however, I would be in a hurry to find another NTDK20 (any release) and the software daughterboard. Did you reseat the software daughterboard?
If you have to reload software you are going to need your last database backup and your keycodes. If that is not available, you may be in for trouble. Since Avaya does not support release 22, they probably wont be able to generate new codes although they might *might* be on KRS. There werent many patches, if any, for release 22 so I wouldn't worry about that.



JB

 

[janaya]

You could try to recover the daughterboard with the fbug procedure. But again, you would have to have the software for the system. Takes about 30 minutes, but I have done that without issues before.

John Anaya
Signet6 Network Sciences
ACSS/ACIS - CS1000 Rls 7.5/Call Pilot 5
ACSS/ACIS - SME - IP Office 8.0
APSS/APDS - Avaya UC Services

Public Profile

http://www.linkedin.com/pub/john-anaya/25/1b9/a9b/Edit

 

[Vurk4]

Thank you, trying to reseat the daughter board now... Ofcourse there is no memory card in it so NO BACKUP!!! And nobody knows where the keycodes are...

 

[Firebird Scrambler]

As it powers up, can you get into "pdt"?. I'd try to copy over the database.bak and config.bak files with the database.rec and config.rec files as I think the *.rec files have gone bad, then reboot the SSC card to reload it with the backed up files.

I had this problem a while ago.

An easier way is to boot up the SSC card and go into "Ctrl I" to the installation menu. From there select the restore from the backup drive. That might do the trick?.


All the best

Firebird Scrambler
Meridian 1 / Succession and BCM / Norstar Programmer in the UK

http://www.linkedin.com/in/davidbromley

If it's working, then leave it alone!.