Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Chris Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

CS1000 - Difference between DNB and TNB outputs from overlay 20 2

Status
Not open for further replies.

Simon Shaw

Programmer
Apr 19, 2017
30
IL
Hi,
I was wondering if anyone could explain what the difference is in the PRT output for the DNB and TNB data blocks.
Looking at the 2 examples below, I can only see the following differences:
1) Device type (TNB - I2004; DNB - SL1) which I presume is a configuration error.
2) There is an extra "V" in the TN.

The output is taken from Version 2121, Release 4.
Appreciate any help here.

BR,

Simon

Code:
> ld 20
PT0000
REQ: PRT
TYPE: TNB
TN   [highlight #F57900]077 0 00 07[/highlight]
DATE
PAGE NO
DES

DES  1635
TN   077 0 00 07  VIRTUAL
[highlight #FCE94F]TYPE I2004[/highlight]
CDEN 8D
CUST 0
ZONE 001
FDN  4000
TGAR 1
LDN  NO
NCOS 6
SGRP 0
RNPG 1
SCI  0
SSU  0000
LNRS 16
XLST
CLS  UNR FBD WTA LPR PUA MTD FNA HTA TDD HFA CRPD
     MWA LMPN RMMD SMWD AAD IMD XHD IRA NID OLA VCE DRG1
     POD DSX VMD CMSD SLKD CCSD SWD LNA CNDA
     CFTD SFD MRD DDV CNID CDCA MSID DAPA BFED RCBD
     ICDD CDMD LLCN MCTD CLBD AUTU
     GPUA DPUA DNDA CFXD ARHD FITD CLTD ASCD
     CPFA CPTA ABDD CFHD FICD NAID BUZZ AGRD MOAD AHD
     DDGA NAMA
     DRDD EXR0
     USRD ULAD RTDD RBDD RBHD PGND OCBD FLXD FTTC MCBN
     VOLA VOUA CDMR
CPND_LANG ENG
RCO  0
HUNT 4000
LHK  1
LPK  0
PLEV 02
CSDN
AST
IAPG 0
AACS NO
ITNA NO
DGRP
MLWU_LANG 0
DNDR 0
KEY  00 SCR 1535 0     MARP
        CPND
          NAME Don Donaldson
          XPLN 13
          DISPLAY_FMT FIRST,LAST
     01 SCR 1635 0     MARP
        CPND
          NAME Don Donaldson
          XPLN 13
          DISPLAY_FMT FIRST,LAST
     02
     03
.....
DATE 28 FEB 2007

Code:
REQ: PRT
TYPE: DNB
CUST
DN   1635
DATE
PAGE
DES
CUST  00

DN   1635
     CPND
       NAME Don Donaldson
       XPLN 13
       DISPLAY_FMT FIRST,LAST
TYPE [highlight #FCE94F]SL1[/highlight]
TN   [highlight #F57900]077 0 00 07 V[/highlight]  KEY 01 H MARP  DES 1635      28 FEB 2007
     (I2004 )

REQ: PRT
TYPE: DNB
CUST
DN   1535
DATE
PAGE
DES
CUST  00

DN   1535
     CPND
       NAME Don Donaldson
       XPLN 13
       DISPLAY_FMT FIRST,LAST
TYPE [highlight #FCE94F]SL1[/highlight]
TN   077 0 00 07 V  KEY 00 H MARP  DES 1635      28 FEB 2007
     (I2004 )
 
No real need to compare them, a DNB prints all the dn's on the switch this would include things without TN's like CDN/ACD/FFC/AC etc.

A TNB is used to see every thing on the switch that has a TN - Phones, Trunks, DTR's, etc. So really depends what you are looking for.
 
The "TYPE SL1" is just a holdover from the older software. Nothing to worry about. The actual type is in brackets below.
The "V" is for "virtual
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top