CS1000 and spectralink

[MasterCommDave]

I am running spectralink IP wireless phones behind a small cs1000 and signaling server, utilizing 2245 SVP server. This was working for previous tennant but this site was networked to another site. The new tennant wants this to work. The spectralink phones will talk to each other with no problem. They will ring wired phones but the voice path is not operational. Please any help is appreciated

 

[Wings08]

First are the wireless phones Nortel branded Spectralink phones and what are the models of the phones. I will assume that they are Nortel phones. If the phones can communicate IP to IP your problem is most likely with the setup on the Nortel side. First verify that the IP setup is corrct on the elan and tlan of the signaling server, media gateway etc. Elan and tlan shoud be on seperate subnets and be static IP addresses. verify that your setup is correct on your media gateway cards and they are enabled. The media gateway is where IP communicates to TDM. Hope this gives you some direction. Good time to document the network. You also mentioned that they netowrked two builds together Did the phones work correctly before that?