Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

cs-1000e 5.0 upgrade to 5.5 j pep problem in CS and SS

Status
Not open for further replies.

jmpprd

Technical User
Nov 16, 2007
39
DO
we update the cs-1000e rel 5.0 to 5.50j and when we apply the deplist peps to the call server, we recive this pep conclict

Conflict PEP List for Release 05.50J CPPM - DEPLIST PEPs are in Bold - Production in Red, Trial in Orange
Num PEP1 PEP2 PEP3 PEP4 PEP5 PEP6 PEP7 Overflow

1 1 p25862_1.cpm p25862_2.cpm
2 2 p25925_2.cpm p25925_1.cpm
3 3 p25925_1.cpm p25925_2.cpm


and in the signalig server nortel isp1100 this

1 1 p25921_1.ss1 p25921_2.ss1


some one can help me to solve this problems





 
Are you trying to put those PEPs in manually?

MPLR25862 and MPLR25925 are in the CORE DepList. If you have the DepList loaded, you won't be able to add these patches manually since they are already there.

Probably the same issue with your Sig Server, but I didn't check

--
Fletch

Nortel Emergency Services PLM

Don't forget about the FREE E911 Webinar Oct. 30th!
Register online at
 
no , i put the last deplist to the CS and SS after the instalation .


jm,

 
Ok, then you put those patches in first and now the deplist is conflicting?

Always install the deplist first. Taht way if you have a single patch conflict, the deplist is already in service.

--
Fletch

Nortel Emergency Services PLM

Don't forget about the FREE E911 Webinar Oct. 30th!
Register online at
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top