Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

CS 1000 PBX

Status
Not open for further replies.

Aklile Tefera

Instructor
Mar 8, 2019
4
US
what is the main case my CS 1000 PBX can't make out going calls receiving is fine . any advise.
 
The initial question is whether the customer has paid their phone bill.

If not, then most suppliers would block outgoing calls.

If outgoing calls go out via LCR (Least Cost Routing) that is a third party, then try another access route.

Failing that, find out what connection type is used and if its a digital trunk card to check its all green on the LED's.

Log into LD 80 and set up a call trace.
Also check if your outgoing RDB has more than one entry as it could be that calls are failing because a circuit has recent been ceased that was primarily used only for outgoing traffic.

Firebird Scrambler

Nortel & Avaya Meridian 1 / Succession & BCM / Norstar Programmer

Website = linkedin
 
PRT your RDB and make sure
ICOG is set to IAO (incoming and outgoing)

Turn on D-channel monitoring and trace the call to find our cause code.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top