Crytpo Tunnel Newbie

[ciscosystem98765]

Greetings Cisco Experts,

I'm trying to implement VPN between

Point A ==== (Internet) ===== Point B

so that point and a and b can securly communicate over the internet,I have not done this before so I will need your
help.

1.First of all if these points have to communicate over over
the Internet,they will need Public IPs ??
2.I have been searching for some basic documentation for VPN implementation but could not find one,does anyone know
some good Sites regarding VPN implementation

Many thanks
aht

 

[reverendo]

See:

http://www.cisco.com/en/US/products...figuration_guide_chapter09186a00800ca7b1.html

for the first point you will need that both routers can reach the interface of antoher, the most simplest way is that both routers have public IP in its interface. But you can put your router behind other gateway and then you need a NAT but this some more complicated because the IPSec Nature.

Regards.

 

[ciscosystem98765]

reverendo,

Thanks alot for the reply,the link was helpful


aht

 

[Jimtron26]

Thank you for the link too reverendo!!!!

I too am trying to set up a VPN between a software client and 1760 VPN server!! I have been looking for something like this for weeks!!

Cheers