Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations IamaSherpa on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Crystal Reports and OMNIS Development Environment

Status
Not open for further replies.

BFAGG

MIS
Aug 23, 2001
64
GB
Any one out there using either OMNIS7364 or OMNIS7371 with Crystal reports?? I need help.
 
We're doing it and I need help to!!!! Whatcha need help with maybe we've dealt with it
 
ZOOTY,

Sorry for the delay in replying.

We are launching reports from within our application. To do this we make calls to the following .dll files:

crpe32.dll
crpaig80.dll
p2sodbc.dll

We pass parameters as required. I won't go into the code as I assume you got that far. Our problem was that it worked OK on some sites, but on others the report window loaded and then disappeared. If we elected to send direct to print, the report started spooling but spooled a zero length file and disappeared.

We have found the solution to be a problem with the p2sodbc.dll. Version 8.0.0.84 has missing functions and causes the process to fail. Other versions have these problems to a varying degree but may be OK. If in doubt, replace the file with version 8.0.0.85. This can be obtained as a download from the crystal reports website , search for download file p2sodbc8. This is a .zip file.

Hope this helps.

Bill
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top