Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Crystal Report - Group Footer with multiple col

Status
Not open for further replies.

lwibisana

MIS
Mar 10, 2010
1
CA
Hi Ibass,
I read your thread as below.

You can format the detail section to "Format with Multiple Columns". Then go to the layout tab and choose a width like 3" and a gap like .5", choose "down then across", and then check "Format groups with multiple columns". Then suppress the detail section.
Please note that one problem you could run into is that if you don't have enough groups to fill the first column, they will not move into a second column. If you think this might be the problem, there is a solution using a subreport that also works.


Please kindly advise with subreport on how to resolve the issue with multiple col, if we don't have groups that can fill the first col. Thanks for your help.

LW
 
Can you provide the thread number for the original post please?

-LB
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top