Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Cross talk fixed

Status
Not open for further replies.

ChilangoDF

IS-IT--Management
Sep 20, 2013
2
US
thread690-1603586

Hello everyone,
after encountering a cross talk on one of our facilities out of 80, and after checking all the settings for my MG configuration, and making sure everything was correct, I called my service provider to let them know the issue I was having with cross talk, e.g. FD staff putting me on hold while she went back to the first call, and me being able to heard the conversation, even thought I was put on hold.
Long story short, issue was resolved when the codec was changed on the service provider side.
Their system was configured to the highest 80 to 110k bandwidth G711 codec to the lower codec of 40k to 60k

Hope this can help someone.

thank you
 
Not sure if your talking PRI or POTS. I almost curtain cross talk is not possible on PRI. Can you please clarify?
 
Saiyan,

He is talking about IP Trunks / SIP trunks.
I suppose you won't have any option to juggle your codecs on POTS or PRI.

Thanks
Ganti
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top