Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
cross over to normal cable
- Thread starter ra98
- Start date
jimbopalmer
Programmer
It would work, but why not just use a normal straight through cable to begin with?
Save the crossovers for those extremely bad days when you need them.
I tried to remain child-like, all I acheived was childish.
Save the crossovers for those extremely bad days when you need them.
I tried to remain child-like, all I acheived was childish.
daronwilson
Vendor
If you are talking about making one, there are many posts here in the forum on how to do that. If you are familiar with 568A and 568B configuration of wiring on modular plugs, you simply make one end "A" and the other end "B" and you have made a crossover cable.
It is only my opinion, based on my experience and education...I am always willing to learn, educate me!
Daron J. Wilson, RCDD
daron.wilson@lhmorris.com
It is only my opinion, based on my experience and education...I am always willing to learn, educate me!
Daron J. Wilson, RCDD
daron.wilson@lhmorris.com
- Status