Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Critical error encountered when processing package ID from EM

Status
Not open for further replies.

Mirko981

Programmer
Jul 28, 2011
31
PE
Hi guys,
i have a problem after run receive from EM Central

<EVENTS>
<EVENT ID="0" DATETIME="2019-02-21 09:46:14">Log Session (17) started.</EVENT>
<EVENT ID="1" DATETIME="2019-02-21 09:46:16">Receiving file "D:\MICROS\RES\EM\TRANSPORT\RECEIVE\S1_D68_C16_P1.MPZ" [1 of 1]</EVENT>
<EVENT ID="2" DATETIME="2019-02-21 09:46:16">Indexing Package File.</EVENT>
<EVENT ID="3" DATETIME="2019-02-21 09:46:16">Package File Index Completed.</EVENT>
<EVENT ID="4" DATETIME="2019-02-21 09:46:16">Fetched package from file.</EVENT>
<EVENT ID="5" DATETIME="2019-02-21 10:07:18">Pass 1 completed. Processed 20394 packets.</EVENT>
<EVENT ID="6" DATETIME="2019-02-21 10:07:18">Pass 2 completed. Processed 92 packets.</EVENT>
<EVENT ID="7" DATETIME="2019-02-21 10:07:19">Pass 3 completed. Processed 0 packets.</EVENT>
<EVENT ID="8" DATETIME="2019-02-21 10:07:19">Receive failed to process ( 99) packets.</EVENT>
<EVENT ID="9" DATETIME="2019-02-21 10:07:19">UMT 2: Critical error encountered when processing package ID "1" sent from "Corporate Site".</EVENT>
<EVENT ID="10" DATETIME="2019-02-21 10:07:19">Log Session (17) ended.</EVENT>
<EVENT ID="0" DATETIME="2019-02-21 10:24:32">Log Session (21) started.</EVENT>
<EVENT ID="1" DATETIME="2019-02-21 10:24:34">Receiving file "D:\MICROS\RES\EM\TRANSPORT\RECEIVE\S1_D68_C16_P1.MPZ" [1 of 1]</EVENT>
<EVENT ID="2" DATETIME="2019-02-21 10:24:35">Indexing Package File.</EVENT>
<EVENT ID="3" DATETIME="2019-02-21 10:24:35">Package File Index Completed.</EVENT>
<EVENT ID="4" DATETIME="2019-02-21 10:24:35">Fetched package from file.</EVENT>
<EVENT ID="5" DATETIME="2019-02-21 10:30:56">Pass 1 completed. Processed 20394 packets.</EVENT>
<EVENT ID="6" DATETIME="2019-02-21 10:30:56">Pass 2 completed. Processed 92 packets.</EVENT>
<EVENT ID="7" DATETIME="2019-02-21 10:30:56">Pass 3 completed. Processed 0 packets.</EVENT>
<EVENT ID="8" DATETIME="2019-02-21 10:30:56">Receive failed to process ( 99) packets.</EVENT>
<EVENT ID="9" DATETIME="2019-02-21 10:30:57">UMT 2: Critical error encountered when processing package ID "1" sent from "Corporate Site".</EVENT>
<EVENT ID="10" DATETIME="2019-02-21 10:30:57">Log Session (21) ended.</EVENT>

Any ideas?

I delete and create again the store in EM Central.
Generate new package and the result is the same.
I used another database, set Concept and Store ID but the same problem ocurrs.

 
If you open the event-log on the receiving site (Micros/res/em/etc) there may be a + symbol on the left of the line that reads <Event ID="8" if you can expand that line and maybe line 9 it will provide more info on what is causing the failure.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top