Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations SkipVought on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Creating rotating text in sphere gif
- Thread starter kevd
- Start date
Yes, but chances are that the file will be huge; so, why not try flash? It's much harder to do the text curving in standard flash but if you use some of the plug-ins you can get now it shouldn't be too bad.
If you're heart is set on PSP though then the best way to curve text (in fact the only way!) is, first off, to draw a vector shape of any variety you like. (If your case an arc or circle would do nicely). Now, take the text tool and place it over the line of the vector shape; you should see the normal text tool change into an A at 45degrees with a curved line underneath it; press the mouse button and add you text (as a vector selection, of course). You should now find that the text follows the vector and that by altering kerning and leading settings you can play around with it's positioning.
It may also be useful to use the 'node edit' option from the vector selection tool so that you can alter the shape of the vector line that your text is on.
Good luck, gimmie a shout if you need to!
=)
PetitPal
If you're heart is set on PSP though then the best way to curve text (in fact the only way!) is, first off, to draw a vector shape of any variety you like. (If your case an arc or circle would do nicely). Now, take the text tool and place it over the line of the vector shape; you should see the normal text tool change into an A at 45degrees with a curved line underneath it; press the mouse button and add you text (as a vector selection, of course). You should now find that the text follows the vector and that by altering kerning and leading settings you can play around with it's positioning.
It may also be useful to use the 'node edit' option from the vector selection tool so that you can alter the shape of the vector line that your text is on.
Good luck, gimmie a shout if you need to!
=)
PetitPal
- Status
Similar threads
