Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Chris Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Creating Missing Sets 1

Status
Not open for further replies.

PTerrell

Technical User
Jun 23, 2003
125
US
I feel really stupid asking this question, but the MICS Installer Guide seems to skip over this step...

I've got a MICS 6.0 on a PRI with DID. I'm using the trick of virtual DNs to run a VMI to send DTMF to my fax server. (Thanks to all on the board who guided me!)

My vender setup a couple of dozen "test" sets and lines that I've successfully used. Now I need more sets and I can't figure out how add them.

I've got lines that I can program the DID Rec'd # and PrimeSet for the sets. But when I try to find the Sets in Line&Sets, they cannot be found.

How do I add a set to create a Virtual DN? What am I missing?
 
Clarification: For the missing sets, I can program the DID Rec'd #, but not the PrimeSet.
 
as far as i know you still need a pysical port either digital of analog-go into maint,/port status-find an unused port-find its dn num.-then go into change dn's and change the port you found to be the ext. num of your did/recievrd digits.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top