creating incoming call routes in bulk and have them all going to the same destinatin?

[larrythephoneguy]

All
Is there a way, under MSN Configuration, or any way to have all of the incoming numbers go to the Main hunt group in bulk in stead of being listed in sequential order? I have a customer with 600 DID numbers and he wants them all to go to the Main hunt group. I've already told him that he has to change them one at a time.
Any thoughts?

 

[amriddle01]

Just use "Any voice" and leave incoming number blank and point that to the group, then just route any not in the 600 individually, it's always most specific match

 

[larrythephoneguy]

This customer is really tiring to get way from editing these DID numbers one at a time.

 

[amriddle01]

You don't need any of them, just use that single entry I mentioned, that will route any call in on any DDI/DID not seperatley routed to the main group

 

[larrythephoneguy]

I see where your coming from. Then he can just assign them on as per needed basis.

 

[amriddle01]

Indeed