Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Creating a Print Queue on NT4.0 Terminal Server

Status
Not open for further replies.

rocketbabe

IS-IT--Management
Sep 6, 2001
15
US
Here's the problem...
Citrix is not autocreating 2 LexMark network printers. The 2 printers have queues on the same Windows 2000 server. And the clients connecting to Citrix are using Windows 2000 laptops. They obviously can print to these printers when not logged into TS/Citrix, but once in Citrix the printers are not available.
When I try to install the printers on the Citrix/NT 4.0 Terminal server, I get "The server on which the printer resides does not have a suitable Lexmark Optra Lx plus printer driver installed. Click on OK if you wish to install the driver on your local machine." If I click OK, it looks for LMPCL2a.dll, which is a file in the LexMark Windows 2000 driver. It will not allow me to install an NT4.0 driver for this printer. Any suggestions?

I thought about creating a print queues on my terminal server for these 2 printers, to avoid needing a Windows 2000 driver, but when I click on Add Port...none of the options seem to apply. What is the procedure to configure a print queue on a NT4.0 Terminal Server?

Rocketbabe
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top