Sam Tool Box 3.6 SP3 don´t support NIU2 with flash ata.
The commands for SCSI-Disk are:
scfmt 3 LL
mkdev /DEV/SC31 231
mkfs /DEV/SC31 FFE0 1000 400
mount /DEV/SC31 /USR1
I try to translate it for NIU2 with flash ata:
atfmt 0 LL
mkdev /DEV/AT01 4#1
mkfs /DEV/AT01 3C00 1000 300
mount /DEV/AT01 /USR1
But it don´t works very well.
Who has the right commands.
The commands for SCSI-Disk are:
scfmt 3 LL
mkdev /DEV/SC31 231
mkfs /DEV/SC31 FFE0 1000 400
mount /DEV/SC31 /USR1
I try to translate it for NIU2 with flash ata:
atfmt 0 LL
mkdev /DEV/AT01 4#1
mkfs /DEV/AT01 3C00 1000 300
mount /DEV/AT01 /USR1
But it don´t works very well.
Who has the right commands.