Create DID Station with no device 1

[NYPQ-EN]

Hi Grace and Peace to all,

Happy Thanksgiving:

Question: How does one create a station without it being connected to a device?

For example : On the Rolm 9751 I would create a “soft” extension that was not connected to a device.

How can I do the same on the HiPath 4000 ?

I need to do this in Ammo for myself , and in Assistant for my co-worker.

?Is there a way for me to save my scripts right on the Hi-Path so that where ever I am and whatever system or laptop I use, my scripts will be available to me?

Thank you all once again for your help.
I continue to fight my management to send us to the Basic Course.
I heard there was a pre-requisite, does anyone know of this and where to takes these?

Thank you all again and have a safe holiday and a Merry Christmas.

You will be hearing from me again and soon.
Our roll out to the HiPath is weeks away from being completed.

 

[sbcsu]

You need to add in a 'float' number or a 'signed off' number.
ADD-SCSU:XXXX,,ANATE,0,0,6,1,6,1,6,1,,,0,0,,,,VAR,,,,ENGLISH,FLOAT,,NO,,,,0,,YES,NO,0,;

With SIGNOFF you have to have 'signed off' ports as well so maybe the 'Float' will suffice ?

 

[sbcsu]

Also to just create a DID extensions with no device you can just add the number in WABE.
Either normally (ADD-WABE:XXXX,,,,STN,N Or just add it specifying CPS (Call Progress State) 6 for an incoming number.
Then you can 'translate' it using the AMO RUFUM
ADD-RUFUMID,0123,6123;

 

[NYPQ-EN]

Good morning SBCSU.

Thank you for your advice on creating a station that is not connected to a device.
I appreciate the help.

Have a blessed day.