Create a new extension on Tadiran Coral PBX

[CaptainCraig]

I am trying to accomplish creating a extension and know that plis is used to create extensions, change names to assigned ports, etc but I don't know how to create a extension. Do I need to issue the plis command and that's it or is there more.
Any feedback would be greatly appreciated.

 

[CaptainCraig]

Actually I figure out the steps. First you use the npl command and these are the steps:

npl
0 General
2 Add
new dial#
new dial#
N choose N for new extension
2 keyset
( 0 8 1) shelf 0, slot 8, circuit 1

and that creates the extension. The rest can be completed by using the feat and prog commands.

 

[metballnut]

Don't forget KEY..and here are some cheats for you:

SIGN IN-
FROM "ENTER PASSWORD" PUT IN your password
HIT ENTER
SIGN OUT- HIT CONTROL P AT ANY TIME


NAME CHANGE-
TYPE "PLIS" FROM ANY LOCATION -ENTER
CHOOSE 1-DIAL_NUM
CHOOSE 0-UPDATE
CHOOSE 2-KEYSET
ENTER EXTENSION #
kEEP HITTING ENTER UNTIL YOU REACH "FULL(16)-"
ENTER NAME, USE UNDERSCORE FOR SPACE BETWEEN CHARACTERS, PRESS ENTER
TO REMOVE NAME JUST TYPE "R" THEN HIT ENTER

BUTTON CHANGE
TYPE "PROG" FROM ANY LOCATION
CHOOSE 0-UPDATE
ENTER EXTENSION #
KEEP HITTING ENTER UNTIL YOU REACH BUTTON 0
ENTER CODE, EXTENSION NUMBER OR SPEED DIAL
PRESS ENTER.
FOR SPEED DIAL PUT 9 AND A SPACE BEFORE NUMBER....9 3375551212
BUTTONS ON PHONE START FROM THE LOWER RIGHT CORNER WITH BUTTON "0" THEN COUNT UP THE COLUMN
THE WELL START AT THE COLUMN TO THE LEFT AT THE BOTTOM (ONLY THE LARGER PHONES)
THE "HOLD, SPKR, XFER CONF, AND MIC" BUTTONS CAN'T BE CHANGED

SPEED DIALS SYSTEM AND PRIVATE
SYSTEM-
TYPE "LIB" FROM ANY LOCATION
CHOOSE 0-PUB.LIB
CHOOSE 0-UPDATE
PICK INDIVIDUAL LIBRARY OR RANGE OF LIBRARIES YOU WANT TO PROGRAM
YOUR RANGE IS 6600 6999
AFTER PICKING THE LIBRARY NUMBER HIT ENTER UNTIL YOU SEE FULL(16)- BLANK.
HERE, YOU CAN PUT A NAME ON THE SPEED DIAL, REMEMBER TO USE UNDER SCORE FOR SPACE
THEN TYPE "N" ENTER "N" ENTER "N"ENTER "0" ENTER THE PHONE NUMBER ENTER 9 ENTER
PRIVATE-
TYPE LIB FROM ANY LOCATION
CHOOSE 1-PRIV.LIB
CHOOSE 0- UPDATE
CHOOSE EXTENSION HIT ENTER TWICE
CHOOSE LIBRARY 7000-7009
HIT ENTER UNTIL YOU SEE "ENTER DIAL NUM-"
PUT IN PHONE NUMBER HIT ENTER
PUT IN "9" HIT ENTER


TIME
TYPE TIME FROM ANY LOCATION
ENTER TIME
AM/PM
DATE
UPDATE "

SWAP PHONES
#17720
THE EXTENSION # YOU WANT TO SWAP WITH
Password - example 4 ZEROS "0000"
#11

vpz-page groups
type vpz
0-update
enter group number
update members

did's from main directory
0 0 7
0
1
add or remove
enter did #, enter
enter did again
enter destination

Control b to back up one line
control u to back up one program