Hello everyone!
I'm trying to master an IBM x3100 M5 with ServeRaid M-100 configured with 2 HDD in RAID 1 to deploy on other Server (not necessary IBM)
I use to prepare with SySPrep then I use Clonezilla to take the image of a HDD.
But on that IBM, Clonezilla purpose 3 HDD (instead of 2):
Gparted information are:
Partition ; File System; Label ;Size ; Flags
/dev/md126p1 ; Fat32 ; ; 200MB ; boot, esp
/dev/md126p2; Unknown ; Microsft reserved partition; 128MB ; msftres
/dev/md126p3; NTFS ; ;93000MB ; msftdata
/dev/sda1 ; Fat32 ; ; 200MB ; boot, esp
/dev/sda2 ; Unknown ; ; 128MB ; msftres
/dev/sda3 ; NTFS ; ; 93000MB ; msftdata
/dev/sdb1 ; Fat32 ; ; 200MB ; boot, esp
/dev/sdb2 ; Unknown ; ; 128MB ; msftres
/dev/sdb3 ; NTFS ; ; 93000MB ; msftdata
I suppose that md126p is the RAID1 image created by ServeRaid M-100.
So I took the md126p image. No problem detected by Clonezilla.
But when I restarted the IBM Server, Windows did not lauch.
I restart Clonezilla to restor the image. But now Clonezilla pupose 2 HDD, sda and sdb (miss md126p)
I restored image on Sda and Sdb.
The IBM won't launch Windows.
The only lead I got is the RAID array is down after Clonezilla, Someone have an idea to make again the RAID 1 array without data destruction to make the IBM server launch with the HDD restored?
Have u another idea?
Thanks.
I'm trying to master an IBM x3100 M5 with ServeRaid M-100 configured with 2 HDD in RAID 1 to deploy on other Server (not necessary IBM)
I use to prepare with SySPrep then I use Clonezilla to take the image of a HDD.
But on that IBM, Clonezilla purpose 3 HDD (instead of 2):
Gparted information are:
Partition ; File System; Label ;Size ; Flags
/dev/md126p1 ; Fat32 ; ; 200MB ; boot, esp
/dev/md126p2; Unknown ; Microsft reserved partition; 128MB ; msftres
/dev/md126p3; NTFS ; ;93000MB ; msftdata
/dev/sda1 ; Fat32 ; ; 200MB ; boot, esp
/dev/sda2 ; Unknown ; ; 128MB ; msftres
/dev/sda3 ; NTFS ; ; 93000MB ; msftdata
/dev/sdb1 ; Fat32 ; ; 200MB ; boot, esp
/dev/sdb2 ; Unknown ; ; 128MB ; msftres
/dev/sdb3 ; NTFS ; ; 93000MB ; msftdata
I suppose that md126p is the RAID1 image created by ServeRaid M-100.
So I took the md126p image. No problem detected by Clonezilla.
But when I restarted the IBM Server, Windows did not lauch.
I restart Clonezilla to restor the image. But now Clonezilla pupose 2 HDD, sda and sdb (miss md126p)
I restored image on Sda and Sdb.
The IBM won't launch Windows.
The only lead I got is the RAID array is down after Clonezilla, Someone have an idea to make again the RAID 1 array without data destruction to make the IBM server launch with the HDD restored?
Have u another idea?
Thanks.