DavidSnell
MIS
This message shows up fairly regularly - I'll get 3 good backups on 3 different tapes and then 1, 2, or 3 with this error all at different stages of completion. It also happens on tapes that may in fact produce a good backup the next time through the rotation. Any thoughts - is the drive failing (scsi wangtek 10/20gig.
Error log follows (the end of it only)
blue logoj.jpg
blue logoj2j.jpg
bright oval logo.gif
bright oval logo.nso
bullet.gif
bullet.nso
compare new.jpg
compare new.nso
Storage device "WANGTEK 1" reported an error on a request to write data to media.
Error reported:
Data error (cyclic redundancy check).
^ ^ ^ ^ ^
Backup completed on 7/3/2002 at 1:52:31 AM.
Backed up 31295 files in 2195 directories.
Processed 4,511,157,084 bytes in 1 hour, 15 minutes, and 56 seconds.
Throughput rate: 56.7 MB/min
Software compression ratio: 1.2:1
----------------------------------------------------------------------
======================================================================
Job ended: Wednesday, July 03, 2002 at 1:52:32 AM
Job completion status: Failed
Error log follows (the end of it only)
blue logoj.jpg
blue logoj2j.jpg
bright oval logo.gif
bright oval logo.nso
bullet.gif
bullet.nso
compare new.jpg
compare new.nso
Storage device "WANGTEK 1" reported an error on a request to write data to media.
Error reported:
Data error (cyclic redundancy check).
^ ^ ^ ^ ^
Backup completed on 7/3/2002 at 1:52:31 AM.
Backed up 31295 files in 2195 directories.
Processed 4,511,157,084 bytes in 1 hour, 15 minutes, and 56 seconds.
Throughput rate: 56.7 MB/min
Software compression ratio: 1.2:1
----------------------------------------------------------------------
======================================================================
Job ended: Wednesday, July 03, 2002 at 1:52:32 AM
Job completion status: Failed