Sep 24, 2008 #1 Mober Technical User Jul 23, 2008 51 US Can anyone gave me a link on how to use IBM server raid?
Sep 25, 2008 #2 itsp1965 IS-IT--Management Dec 9, 2003 2,669 CA Start with reading the manual for your particular serveraid adapter. It will show you what u need to know. Also check the IBM server support site for any technical notes, firmware updates, etc. Check this site for troubleshooting http://www-304.ibm.com/systems/supp...ocdisplay?brandind=5000008&lndocid=MIGR-50645 Upvote 0 Downvote
Start with reading the manual for your particular serveraid adapter. It will show you what u need to know. Also check the IBM server support site for any technical notes, firmware updates, etc. Check this site for troubleshooting http://www-304.ibm.com/systems/supp...ocdisplay?brandind=5000008&lndocid=MIGR-50645
Sep 27, 2008 #3 goombawaho MIS Oct 7, 2007 6,597 US Make sure you keep the firmware at the same level (revision) as the driver used for your operating system. There should be a place on the IBM site that will give you a link to drivers and to the matching firmware. Upvote 0 Downvote
Make sure you keep the firmware at the same level (revision) as the driver used for your operating system. There should be a place on the IBM site that will give you a link to drivers and to the matching firmware.