I'm curious to see if Nortel has a command either via the MIB's, BCC, or CLI to check CPU utilization. The Passport is running 15.6 code I think. I'm getting a trap into my ticket system reporting high CPU utilization and I'm fairly certain that there isn't a way to check that out but wanted to run it by the technical community.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
CPU Process on Passport 2430
- Thread starter sarinean
- Start date
DaddyOfThree
Technical User
You can stat the CPU utilization from within BCC;
bcc> show process cpu detail
show process cpu detail Jun 26, 2008 07:00:12 [GMT-5]
Name Slot Used %Used
---------------- ---- ----------- -------
kernel 1 51231781 26 %
snmp 1 4620 0 %
tn 1 292 0 %
tcp 1 4 0 %
ospf2 1 185989 0 %
ppp 1 760939 0 %
ftp 1 0 0 %
raesa 1 0 0 %
rmonstat 1 1 0 %
bcc 1 717 0 %
idle 1 139442487 72 %
Cheers!
bcc> show process cpu detail
show process cpu detail Jun 26, 2008 07:00:12 [GMT-5]
Name Slot Used %Used
---------------- ---- ----------- -------
kernel 1 51231781 26 %
snmp 1 4620 0 %
tn 1 292 0 %
tcp 1 4 0 %
ospf2 1 185989 0 %
ppp 1 760939 0 %
ftp 1 0 0 %
raesa 1 0 0 %
rmonstat 1 1 0 %
bcc 1 717 0 %
idle 1 139442487 72 %
Cheers!
- Status
Similar threads
- Locked
- Question
- Locked
- Question
- Locked
- Question
- Locked
- Question
