Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

CPE Handoff Information

Status
Not open for further replies.
Roger61

Roger61

Technical User
Mar 10, 2022
6
US
The site is moving over to Sip. The vendor needs CPE Handoff Information shown below. what LDS would I find this info?

CPE Handoff – TI CAS, PRI, Analog
TI Coding – AMI, B8ZS
T1 Framing – D4, ESF
T1 FDL Type – ANSI AT&T, none
T1 Switch Type – 4ESS, 5ESS
DNIS – 10 digits, 7 digits, 4 digits
Channel selection – Linear: IN-Ascending, Out-Descending
Circular: Ascending, Descending
 
Status
Not open for further replies.

Similar threads

jpanzer
  • Locked
  • Question
Any information/firmware on the M5317T ISDN phones?
Replies
0
Views
91
jpanzer
jpanzer
jamesdavid007
  • Locked
  • Question
Im im looking for information on wh
Replies
5
Views
114
KCFLHRC
KCFLHRC
Andrew_G
  • Locked
  • Question
CS1000 CPPM read security dongle information
Replies
1
Views
99
Firebird Scrambler
Firebird Scrambler
Crowtalks
  • Locked
  • Question
CS1000e 5.5 UTC call no longer showing information
Replies
5
Views
117
Crowtalks
Crowtalks
kkitkat69
  • Locked
  • Question
Caller information not displaying on IP Phones causing PD services stop
Replies
0
Views
48
kkitkat69
kkitkat69

Part and Inventory Search

Sponsor

Back
Top