CPDN

[Burgal]

Is it possible to use a CPND for a t1-pri incoming RDB number?

Eg, incoming calls appear on 6021-1 to 6021-23 depending on what channel the call is coming in on. I'd like it to say EXTERNAL CALL or something like that for the CPND.

I created a CPND for 6021 and the system accepted it, however it doesn't show up.

We don't have call display as that's a feature we're not willing to pay for.

RLS 23.11
Opt11c

 

[wdhb]

you can name the Route ACOD DN

 

[Burgal]

How do you do that?

 

[johnpoole]

if you put a name on 6021 you did name the acod, ld 21 prt rdb.. the acod prompt is a little over half way down.. if you named that and are not getting the name on incoming calls, something else is amiss.. dial 6021 from your station, do you see a name their? in load 90 prt cpnd and posts it..

john poole
bellsouth business
columbia,sc

 

[Burgal]

Ok, so the ACOD is the actual name of the route? I can change that from the numerical form of the route, to a text name?

ld 21
prt
rdb

TYPE RDB
CUST 00
DMOD
ROUT 21
DES DID_RTE
TKTP DID
SAT NO
RCLS EXT
DTRK YES
DGTP PRI
ISDN YES
MODE PRA
IFC D100
SBN NO
NCNA YES
NCRD NO
ISAR YES
RTN 99
MIN 2
MAX 17
NCOS 0
ADDP NO
BCOT 0
DSEL VOD
PTYP PRI
AUTO NO
DNIS NO
DCDR NO
ICOG IAO
RANX NO
SRCH LIN
TRMB YES
STEP
ACOD 6021
TCPP NO
PII NO
TARG 01
CLEN 1
BILN NO
OABS
INST
ICIS YES
TIMR ICF 256
OGF 512
EOD 13952
NRD 10112
DDL 70
ODT 4096
RGV 640
FLH 510
GRD 896
SFB 3
NBS 2048
NBL 4096
TFD 0
DRNG NO
CDR NO
MUS YES
MRT 10
MR NO
EQAR NO
TTBL 0
PLEV 2
MCTS NO
ALRM NO
ART 0
SGRP 0
AACR NO

 

[wdhb]

The ACOD = access code, you can dial this to select the route

to name go to LD95
REQ = NEW
TYPE = NAME

DN = 6021

 

[Burgal]

Yeah, that's what I did originally.

MEM AVAIL: (U/P): 1327657 USED: 294358 TOT: 1622015
DISK RECS AVAIL: 436
REQ new
TYPE name
CUST 0
DIG
DN 6021
NAME EXTERNAL CALL
XPLN
DISPLAY_FMT
DN

It still doesn't display anything when you dial 6021.

 

[Burgal]

I did a prt to check if it was there, and it is:

REQ prt
TYPE name
CUST 0
PAGE
DIG
DN 6021

DN 6021
TYPE TRK
NAME EXTERNAL CALL
XPLN 23
DISPLAY_FMT FIRST,LAST

 

[mluckie1]

Sounds more set based. Check to see what the cls is for the set. CNDA, DNDA, and TDD(or ADD depending on rls). Does the name ever show up? is name display working on internal calls?

 

[Burgal]

CLS CTD FBA WTA LPR PUA MTD FNA HTA ADD HFA
MWA AAD IMD XHA IRD NID OLD VCE DRG1
POD DSX VMD CMSD CCSD SWD LNA CNDA
CFTA SFD MRD DDV CNID CDCA
ICDD CDMD MCTD CLBD AUTU
GPUD DPUA DNDA CFXA ARHA FITA CLTD ASCD
CPFD CPTD ABDD CFHD FICD NAID
DDGA NAMA
USRD ULAD RTDD FLXD FTTC

This phone always displays the names internally.

 

[Burgal]

Here's something quirky that I just noticed...

If I call someone, put them on hold, switch to another line, and finally come back to my original line, then the CPND name will display.

But only if I switch lines, and come back.