CPDM3 MX-One integration

[samsal]

Hello all,

I have a CPDM3 device and I want to configure it, I have a MX-ONE 5 SP 1. Any one can help me with the integration?
What type of port I should configure in the MX-ONE?

 

[samsal]

I want to configure integrated DECT

 

[doktor]

If you want to install integrated DECT you need the ELU31 board and basestations like BS330 or BS340.
You need comands to intiate the ELU31, the bases and the DECT handsets.
Now a days I normally install the IP DECT, where the interface is the IP/generic extension of the MX-ONE 5.0.

///doktor

 

[samsal]

Thanks doktor, I have the ELU31 and the basestations programmed and ready,in the documentation of the CPDM3 device it is mentioned that "Port 1814 is used for communication with the MX-ONE. This port has to be defined in the MX-ONE as well. The MX-ONE must also be configured to use port 1815 when communicating with CPDM3."

Which commands should I use to configure these ports?

 

[doktor]

Here are some usefull commands:

sms_client_initiate -ip 192.168.1.1 -port 1815

sms_server_initiate -dir 8888 -ip 192.168.1.4 -port 1814


///doktor

 

[samsal]

Thanks doktor,

I will test them