-
1
- #1
I have a site CS1000M, release 7.0 using 2 CPDCs for signaling servers. I am having a problem using Telnet to connect to them. Telnet is allowed on those CPDCs.
The problem is that Telnet runs so slowly that it times out after entering the password. SSH works just fine, but my customer prefers to use Procomm instead of PuTTY. He says that it worked in the past, but I cannot be 100% certain as I have not seen it work myself.
We have determined it isn't a network problem by plugging a crossover cable directly into the TLAN and ELAN ports on the faceplate of the cards.
We have tried to harden telnet off and harden telnet on and rebooted several times. I am certain this isn't the problem.
Any other suggestions?
The problem is that Telnet runs so slowly that it times out after entering the password. SSH works just fine, but my customer prefers to use Procomm instead of PuTTY. He says that it worked in the past, but I cannot be 100% certain as I have not seen it work myself.
We have determined it isn't a network problem by plugging a crossover cable directly into the TLAN and ELAN ports on the faceplate of the cards.
We have tried to harden telnet off and harden telnet on and rebooted several times. I am certain this isn't the problem.
Any other suggestions?
