CP2.02 201i hard drive

[teekow]

Here is a direct quote from the CP Sares Planning bulletin:

"*if 201i is rls<15, then use NTUB94AA as NTRH9107E5 also needed to mount 2.5 inch HDD"

What is the "rls<15" referring to. I would assume it is a specific hardware release, but I am trying to figure out how to check. This excerpt is from a section of the bulletin referring to hard drive replacement part numbers. If rls is > 15, I can order 1 part number (HD only), but if it is < 15 I need 2 part numbers (HD and coversion kit).

Any ideas?

Thanks
Rob

 

[yyrkroon]

the rls (release) the bulletin is referring to is the release of the actual 201i card itself. The number will be printed on the faceplate of the card.

 

[MagnaRGP]

or have a look at the existing unit. if it has a 3.5" hd, it is <15. if it has a 2.5" hd it is either >15 or has already been converted.