cp150 exception 1000 on powerup

[senk1s]

has anyone seen this message ... the cp will not even go as far the bootloader is. it just keeps resetting itself ...no power to any of the LEDs, except right at teh begining
thanks in advance
here is the complete dump ...

Exception 1000
IP=FFC602D0 MSR=00001000
CR=31117111 XER=C000867F LR=FFC63FB0 CTR=00000000
R00=FFC63A80 0000A858 0000D520 0000BDE8 FFC63F70 FFFFDB40 FFC60330 00007AD0
R08=00007AD0 00000002 0000F5E0 00000020 00000005 0000D542 00000001 00000000
R16=00000000 00000000 10000000 00000000 00000000 00000001 00000000 0000BD10
R24=017FFFFF 0000BD50 0000BD62 00000000 00000000 02A6BF61 00000F0E 00000000

 

[telemarv]

Sounds like software failure. Stupid question: Are you sure the flash card is in the right slot?

 

[senk1s]

yes telemarv...the s/w is in the slot closer to the wall. (this works on another CP150 fine, so the s/w seems to be ok)

i even tried reloading the flash (bootflash) ...
tried upgrading the software ...

but this happens way upfront in the bootup sequence
this is the trace i got from the serial port

 

[rhowlett]

I had the saem thing happen to me. Send it back to Nortel. They shiped me a new one back to replace it. It appears to be some sort of internal corruption that is not user fixable.

 

[senk1s]

thats what i did too ...