Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

cp100 can't be accessed through network

Status
Not open for further replies.

ebahar

Programmer
Mar 17, 2007
4
CA
Hi I have a call pilot 100. Can access it through the serial port and with a cross over lan cable. Changed the ip address (my internal lan system uses 10.240.170.63) but can't access it over my network. I can ping it ok, but internet explorer on pc and safari on osx can't see it giving a "posix access error"

Any ideas?
Thanks
 
Is this a ststic IP address.If you disconnect the CP from the network can you still ping it.
 
Hi - it is a static ip - can't ping when disconnected.
Not sure what to do next.
Thanks
 
Try adding the default gateway.It sounds like it's a good IP address.What is safari.
 
Not sure apple stuff will work with the CP. It is not in the PC rquirments.That mite be the problem.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top