Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

CP IP

Status
Not open for further replies.

silver987

Vendor
Sep 22, 2004
1,409
US
How do I reset the CP IP to default.

Wayne T
 
laptop via serial using hyperterminal or procomm etc.

Going back to default wont help much, while your there you might as well change it to what your need or just record what the ZIP is if going direct with laptop.

You can boot the CP and what hyperterminal to see the IP then it may say press any key within 2 seconds to change parameters where you can then change the IP.


________________________________________

Add me to LinkedIN

small-logo-sig.png

=----(((((((((()----=
Toronto, CAN
 
Yes, I did that but when I put the new IP in it says "Invalid"

Wayne T
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top